Three Common Forms of Pulse Supplies: Single, Double and Multi-Pulse

2026-10-29
Three Common Forms of Pulse Supplies: Single, Double and Multi-Pulse - Nenghua Power
Photo: Jinan Nenghua real products

By how the output waveform is organized, pulse supplies commonly come in three forms: single, double and multi-pulse. These are not simply tiers of quality but design choices for different process needs.

Single pulse

Output is a unidirectional square pulse train: on, off, on, repeating. The structure is relatively simple and the control target clear, making it the most basic form. It already delivers the core benefits of pulsed processing: off time lets the interface recover, and peak is decoupled from average.

Double pulse (periodic reversal)

A reverse pulse is added to the forward one, forming a forward-reverse or forward-gap-reverse-gap cycle. During the reverse phase, protruding points dissolve preferentially, levelling the surface while refreshing the interface. The cost is that some freshly deposited metal is re-dissolved, lowering throughput.

Multi-pulse (grouped)

Several narrow pulses are grouped, with longer intervals between groups. This keeps the surface-quality advantage of short pulses at high average power, while the group interval provides flushing and deionization. It is the usual answer to "efficiency and surface quality cannot both be had".

Comparison

FormAdvantageCostTypical use
SingleSimple, efficientLimited leveling and throwing powerGeneral pulse plating, EDM
DoubleGood leveling, dense filmsLower throughput, complex controlPrecision plating, MAO
MultiEfficiency and quality togetherComplex tuningWire cutting, demanding EDM

How to choose

The test is direct: do you need reverse dissolution and do you need high frequency inside groups? For leveling and densification, choose double pulse. To keep short per-pulse energy while preserving throughput, choose multi-pulse. Needing neither, single pulse is the most economical. Real equipment often combines them, such as bipolar with grouping.

Order of parameter tuning

Set average current density first (throughput), then frequency and width (surface quality), and finally reverse or grouping parameters (leveling and efficiency). This order avoids the trap where changing one thing disturbs everything else. See dual pulse supplies and bipolar pulse supplies; more solutions are in the pulse power category.

Related Articles

All News

Frequently Asked Questions

Single pulse?
Output is a unidirectional square pulse train: on, off, on, repeating. The structure is relatively simple and the control target clear, making it the most basic form. It already delivers the core bene
Double pulse (periodic reversal)?
A reverse pulse is added to the forward one, forming a forward-reverse or forward-gap-reverse-gap cycle. During the reverse phase, protruding points dissolve preferentially, levelling the surface whil
Multi-pulse (grouped)?
Several narrow pulses are grouped, with longer intervals between groups. This keeps the surface-quality advantage of short pulses at high average power, while the group interval provides flushing and
Comparison?
FormAdvantageCostTypical use SingleSimple, efficientLimited leveling and throwing powerGeneral pulse plating, EDM DoubleGood leveling, dense filmsLower throughput, complex controlPrecision plating, MA
How to choose?
The test is direct: do you need reverse dissolution and do you need high frequency inside groups? For leveling and densification, choose double pulse. To keep short per-pulse energy while preserving t