Product Features and Performance of Micro-Arc Oxidation Power Supplies

2026-08-29
Product Features and Performance of Micro-Arc Oxidation Power Supplies - Nenghua Power
Photo: Jinan Nenghua real products

MAO, also called plasma electrolytic oxidation, uses high voltage and pulsed current to create short-lived micro discharges on the metal surface. Those discharges convert the surface into a dense ceramic oxide that resists wear, heat and corrosion.

When the question is product Features and Performance of Micro-Arc Oxidation Power Supplies, the answer usually comes down to three checks: output rating, waveform quality and the duty cycle the process actually demands.

How the MAO process works

The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with very high local temperature that sinter the oxide into a hard ceramic layer.

Requirements on the power supply

Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that record is the fastest way to diagnose an unstable bath or a failing contact.

Process parameters and bath control

Electrolyte composition, temperature and conductivity set the discharge characteristics. Bath temperature is usually held below about 40 C by a heat exchanger, since a warm bath shifts the discharge regime and roughens the coating.

Applications and limits

The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range of a few microns to around a hundred microns.

About the supplier

Where standard ratings do not fit, Jinan Nenghua supplies customised power conversion equipment: output voltage and current ranges, control interfaces and cooling arrangements are defined around the actual process. Technical support covers selection, installation and long-term maintenance planning.

Related Articles

All News

Frequently Asked Questions

How the MAO process works?
The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with
Requirements on the power supply?
Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that rec
Process parameters and bath control?
Electrolyte composition, temperature and conductivity set the discharge characteristics. Bath temperature is usually held below about 40 C by a heat exchanger, since a warm bath shifts the discharge r
Applications and limits?
The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range
About the supplier?
Where standard ratings do not fit, Jinan Nenghua supplies customised power conversion equipment: output voltage and current ranges, control interfaces and cooling arrangements are defined around the a