Micro-Arc Oxidation Power Supplies: Demystifying Advanced Surface Treatment

2026-05-21
Micro-Arc Oxidation Power Supplies: Demystifying Advanced Surface Treatment - Nenghua Power
Photo: Jinan Nenghua real products

Micro-arc oxidation (MAO) grows a hard ceramic oxide layer directly on light metals such as aluminium, magnesium and titanium. The power supply is what makes the process possible: it must drive the workpiece into the plasma discharge region and hold it there in a controlled way.

Readers looking specifically at micro-Arc Oxidation Power Supplies: Demystifying Advanced Surface Treatment should start from the load - what current the process needs, how long it runs, and what cooling is available on site.

How the MAO process works

The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with very high local temperature that sinter the oxide into a hard ceramic layer.

Requirements on the power supply

Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that record is the fastest way to diagnose an unstable bath or a failing contact.

Process parameters and bath control

Current density, treatment time and the pulse waveform together determine thickness and surface finish. Longer treatments give thicker, harder layers but a rougher outer zone, so many lines finish with a sealing or light polishing step.

Applications and limits

The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range of a few microns to around a hundred microns.

About the supplier

Jinan Nenghua Electromechanical designs and builds industrial DC power supplies, pulse power supplies and electrochemical power supplies for plating, anodizing, electrolysis and hydrogen production lines. Each unit is configured to the required voltage, current, ripple and cooling method, and is backed by commissioning and maintenance support.

Related Articles

All News

Frequently Asked Questions

How the MAO process works?
The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with
Requirements on the power supply?
Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that rec
Process parameters and bath control?
Current density, treatment time and the pulse waveform together determine thickness and surface finish. Longer treatments give thicker, harder layers but a rougher outer zone, so many lines finish wit
Applications and limits?
The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range
About the supplier?
Jinan Nenghua Electromechanical designs and builds industrial DC power supplies, pulse power supplies and electrochemical power supplies for plating, anodizing, electrolysis and hydrogen production li