
The square-wave pulse is the most basic pulse-plating current form, called single pulse. From it derive DC-superimposed, periodic-reversal and interrupted pulses, each mapped to a different coating goal. Pick the wrong waveform and the process suffers. This article sorts out the family.
A fixed-parameter unidirectional pulse whose current direction never changes. Simplest and fit for most routine pulse plating; the downside is that changing parameters usually means stopping to reconfigure.
Besides the forward deposition pulse, a reverse anodic pulse is added: forward plates metal, reverse dissolves preferentially at peaks and weak pores, leveling the surface, lowering porosity and raising purity. For gold, silver and nickel deposits where appearance and function both matter, the forward/reverse ratio is the balance between leveling and efficiency.
It cycles several pulse groups with different width, frequency, amplitude and reversal timing. Different parameters yield different structures or compositions, and alternating them can produce superior micro-nano multilayer coatings — a strong tool for nano-plating R&D.
Match waveform to goal: single/bipolar for refinement, multi-pulse for multilayers, reversal for leveling. Equipment-wise, units with independently adjustable forward/reverse and duty — such as a pulse-plating supply, gold-plating or nickel-plating pulse supply — are more flexible. See the pulse power category for the full lineup.
Micro-EDM demands sub-microsecond inter-pulse accuracy that…
2026-10-28A high-voltage pulse power supply adds a switching stage on…
2026-10-28Mention pulse power and many think only of plating. In fact…
2026-10-28In semiconductor dry etching, etch uniformity often runs in…
2026-10-29A pulse power supply does not simply "give electricity on a…
2026-10-28Pulse power supplies are dense in power devices and switchi…