
Hard anodizing and conventional decorative anodizing use the same principle but very different electrical regimes: hard coatings need high current density and a chilled bath, while decorative work runs at lower current with longer times.
Approaching analysis of the Principle and Applications of Pulse Oxidation Power Supplies from the process side keeps the specification honest: define the load, the duty cycle and the environment first, then choose the equipment.
Current density is the main control variable. Too low a value gives slow growth, too high a value generates heat faster than the bath can remove it, which produces soft, powdery or burnt coatings.
Ripple matters: excessive AC content on the DC output shows up as uneven film thickness and colour variation. A well-filtered high-frequency switching supply with tight current regulation gives noticeably more uniform results than an unfiltered thyristor rectifier.
Agitation and filtration keep the electrolyte uniform and carry heat away from the workpiece surface. Poor agitation is one of the most common causes of local burning on complex shapes.
Rack contact is critical: an aluminium rack builds its own oxide and gradually increases resistance, so contact points must be cleaned or stripped between cycles. Logging voltage at constant current gives an early warning of contact degradation.
Where standard ratings do not fit, Jinan Nenghua supplies customised power conversion equipment: output voltage and current ranges, control interfaces and cooling arrangements are defined around the actual process. Technical support covers selection, installation and long-term maintenance planning.
High-frequency switching power supplies have replaced thyris…
2026-07-12MAO, also called plasma electrolytic oxidation, uses high vo…
2026-07-25Hard anodizing and conventional decorative anodizing use the…
2026-07-05A stable, low-ripple DC source is the starting point for rep…
2026-07-25Large electrolytic loads are unforgiving on power equipment:…
2026-06-30Anodizing thickens the natural oxide film on aluminium and i…