Micro-Arc Oxidation Power Supplies: Principle, Features and Applications

2026-04-10
Micro-Arc Oxidation Power Supplies: Principle, Features and Applications - Nenghua Power
Photo: Jinan Nenghua real products

A micro-arc oxidation power supply is not an ordinary rectifier. It has to deliver high voltage, pulsed bipolar current and fast control across a load whose impedance changes continuously as the coating grows.

Readers looking specifically at micro-Arc Oxidation Power Supplies: Principle, Features and Applications should start from the load - what current the process needs, how long it runs, and what cooling is available on site.

How the MAO process works

The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with very high local temperature that sinter the oxide into a hard ceramic layer.

Requirements on the power supply

Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that record is the fastest way to diagnose an unstable bath or a failing contact.

Process parameters and bath control

Electrolyte composition, temperature and conductivity set the discharge characteristics. Bath temperature is usually held below about 40 C by a heat exchanger, since a warm bath shifts the discharge regime and roughens the coating.

Applications and limits

The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range of a few microns to around a hundred microns.

About the supplier

Jinan Nenghua has supplied rectifier and power conversion equipment to plating, surface treatment and electrochemical plants for many years. Share your process parameters - voltage, current, duty cycle and cooling preference - and the engineering team will propose a matched configuration.

Related Articles

All News

Frequently Asked Questions

How the MAO process works?
The workpiece is immersed in a weak alkaline electrolyte and connected as the anode. As voltage rises past a critical value the growing oxide film breaks down locally, producing micro discharges with
Requirements on the power supply?
Stable current control matters more than absolute voltage accuracy, since coating growth rate tracks the charge passed. Look for a supply that logs voltage and current over the cycle, because that rec
Process parameters and bath control?
Electrolyte composition, temperature and conductivity set the discharge characteristics. Bath temperature is usually held below about 40 C by a heat exchanger, since a warm bath shifts the discharge r
Applications and limits?
The process is limited to valve metals - mainly aluminium, magnesium and titanium - and it is energy intensive. Coating growth slows sharply with thickness, so it is best suited to layers in the range
About the supplier?
Jinan Nenghua has supplied rectifier and power conversion equipment to plating, surface treatment and electrochemical plants for many years. Share your process parameters - voltage, current, duty cycl